Need to interview a subject matter expert?
Please select an expert within the following industries and contact email@example.com, 1-303-305-8021 to schedule and interview.
Google Glass is Far More than the Sum of its Parts, IHS Teardown Reveals
El Segundo, Calif. (May 13, 2014)—Teardown analysis is a useful tool for understanding the component and manufacturing cost of electronics devices—but it doesn’t always tell the whole story of the value of a product.
Case in point is Google Glass, which sells for $1,500—but has hardware and manufacturing costs that amount to just $152.47, according to a dissection of the product conducted by the Teardown Analysis Service at IHS Technology (NYSE: IHS). Does that mean that Google is pocketing a sky-high margin of 90 percent on each Glass sale?
Not by a long shot.
“As in any new product—especially a device that breaks new technological ground—the bill of materials (BOM) cost of Glass represent only a portion of the actual value of the system,” said Andrew Rassweiler, senior director, cost benchmarking services for IHS. “IHS has noted this before in other electronic devices, but this is most dramatically illustrated in Google Glass, where the vast majority of its cost is tied up in non-material costs that include non-recurring engineering (NRE) expenses, extensive software and platform development, as well as tooling costs and other upfront outlays. When you buy Google Glass for $1,500, you are getting far, far more than just $152.47 in parts and manufacturing.”
Looking through the Glass
Google Glass carries a BOM of $132.47. When the $20.00 manufacturing expense is added, the cost to produce the head-mounted computer rises to $152.47.
The attached table presents the preliminary BOM of Google Glass. Note that this teardown assessment is preliminary in nature, accounts only for hardware and manufacturing costs, and does not include other expenses such as software, licensing, royalties or other expenditures.
For more details on the IHS Teardown analysis of the Google Glass, please visit: https://technology.ihs.com/499685
Although thousands of units are in the hands of users, Google Glass is not yet generally available through retail. The pre-mass-market status of Google Glass is evident by examining its design.
“Today’s Google Glass feels like a prototype,” Rassweiler said. “The design employs many off-the-shelf components that could be further optimized. If a mass market for the product is established, chip makers are expected to offer more integrated chipsets specific to the application that will greatly improve all aspects of performance, including processing speed, energy efficiency, weight and size. Future product revisions are sure to make strides in all of these areas.”
Last year’s model
Most of the integrated circuits (ICs) in Google Glass are mature when compared with recent flagship smartphone designs. For example, the Texas Instruments Inc. OMAP4430 apps processor used in Google Glass is made with 45-nanometer (nm) semiconductor manufacturing technology—two generations behind the 28nm chips employed in the latest flagship smartphones.
The use of more cutting-edge ICs could yield future Google Glass products that are smaller, lighter, more energy-efficient and less costly to produce than the current model.
High cost for LCOS
The second most expensive single component in Google Glass is also its most defining feature: its head-mounted liquid-crystal on silicon (LCOS) projector display. IHS estimates the cost of the Himax Technologies Inc. LCOS projection element made by Taiwan’s Himax Technologies Inc. at $20.00, accounting for 15 percent of the total Glass BOM.
“The LCOS display is the sine qua non of the Glass,” Rassweiler noted. “Just as e-readers wouldn’t exist without their e-Ink screens, Glass wouldn’t be possible with the LCOS display. The display is pretty slick, providing a near-eye viewing experience that must be seen to be believed.”
Texas Instruments inside
Texas Instruments components dominate the Glass design, with the semiconductor supplier contributing the apps processor, power management IC, audio codec, battery fuel gauge and regulator ICs. Altogether, TI accounts for an estimated $37.90 worth of components identified so far in the Glass, representing 29 percent of the BOM.
Glass includes two accelerometers: one from STMicroelectronics and another from InvenSense Inc. Accelerometers are commonly used to detect motion in electronic devices, such as smartphones and video-game controllers. Given that smartphones generally incorporate just one multiaxis accelerometer, the use of two of these devices represents an interesting and unusual design choice that must be further investigated to be understood.
The frame of the Glass represents the single most expensive component of the device, at $22.00, or 17 percent of the BOM. The frame is made of titanium, a highly durable and expensive material used in high-performance military aircraft and in some eyeglass frames. However, titanium is rarely used in commercial electronic devices analyzed by the IHS Teardown Analysis Service.
“The frame is just one aspect of how Google is presenting Glass as a premium product,” Rassweiler noted. “The quality of the packaging and accessories, along with how the box contents are staged, gives the whole Google Glass experience a very high-end feel and appeal.”
# # #
About IHS (www.ihs.com)
IHS (NYSE: IHS) is the leading source of information, insight and analytics in critical areas that shape today's business landscape. Businesses and governments in more than 165 countries around the globe rely on the comprehensive content, expert independent analysis and flexible delivery methods of IHS to make high-impact decisions and develop strategies with speed and confidence. IHS has been in business since 1959 and became a publicly traded company on the New York Stock Exchange in 2005. Headquartered in Englewood, Colorado, USA, IHS is committed to sustainable, profitable growth and employs more than 8,000 people in 31 countries around the world.
IHS is a registered trademark of IHS Inc. All other company and product names may be trademarks of their respective owners. Copyright © 2014 IHS Inc. All rights reserved.